Yamaha RX-V1800 - Manual (Page 83)

79
En
Customizing this unit (MANUAL SETUP)
AD
V
ANCED
OPERA
T
ION
English
Use the remote control to access and adjust each
parameter.
y
• You can change the “SET MENU” parameters while this unit is
reproducing sound.
• If you press IPARAMETER during the “SET MENU”
operation, the “SET MENU” operation is canceled.
• Repeat the following procedure to select and adjust each
parameter setting.
• Press 4RETURN to return to the previous menu level.
1
Set the operation mode selector to C
AMP
and then press F
SET MENU to enter “SET
MENU”.
The top “SET MENU” display appears in the OSD.
2
Press 3k / n to select “MANUAL SETUP”.
3
Press 3
ENTER to enter “MANUAL SETUP”.
The “MANUAL SETUP” display appears in the
OSD.
4
Press 3k / n repeatedly and then press
3
ENTER to select and enter the desired
menu.
The following displays are examples where “SOUND
MENU” is selected.
5
Press 3k / n repeatedly and then press
3
ENTER to select and enter the desired
submenu.
The following display is an example where “LFE
LEVEL” is selected.
6
Press 3k / n to select the desired parameter
and then 3l / h to change the parameter
settings.
• Press 3h to increase the value.
• Press 3l to decrease the value.
7
Press F
SET MENU to exit from “SET
MENU”.
Using SET MENU
[ ]/[ ]:
[ENTER]:
[ p
SET MENU
;AUTO SETUP
;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
UP/DOWN
Enter
.
[ ]/[ ]:
[ENTER]:
[ p
MANUAL SETUP
1 BASIC MENU
2 VOLUME MENU
3 SOUND MENU
4 INPUT MENU
5 OPTION MENU
UP/DOWN
Enter
.
[ ]/[ ]:
[ENTER]:
[ p
3 SOUND MENU
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)AUDIO SET
F)HDMI SET
UP/DOWN
Enter
.
[ ]/[ ]:
[p]/[[]:
[ p
B)LFE LEVEL
SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
UP/DOWN
Adjust
.