Yamaha RX-V1800 - Manual (Page 64)

60
En
XM™ Satellite Radio tuning
■ All Channel Search mode
1
Press H
SEARCH MODE (or FSRCH
MODE) repeatedly to select “ALL CH
SEARCH”.
2
Press F
CATEGORY (or 3A-E/CAT. l / h)
repeatedly to change the channel category.
3
Press G
PRESET/TUNING/CH l / h (or
3 PRESET/CH k / n) repeatedly to search
for a channel within all channels.
y
You can search for a channel quickly by pressing and
holding GPRESET/TUNING/CH l / h (or
3PRESET/CH k / n).
■ Category Search mode
1
Press H
SEARCH MODE (or FSRCH
MODE) repeatedly to select “CAT SEARCH”.
2
Press F
CATEGORY (or 3A-E/CAT. l / h)
repeatedly to change the channel category.
3
Press G
PRESET/TUNING/CH l / h (or
3 PRESET/CH k / n) repeatedly to search
for a channel within the selected channel
category.
y
You can search for a channel quickly by pressing and
holding GPRESET/TUNING/CH l / h (or
3PRESET/CH k / n).
■ Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see “Setting the XM™ Satellite Radio preset
channels” on page 62.
y
The initial factory setting of all preset channels (A1 to E8) is
“[001] Preview”.
1
Press H
SEARCH MODE (or FSRCH
MODE) repeatedly to select “PRESET
SEARCH”.
2
Press F
CATEGORY (or 3A-E/CAT. l / h)
repeatedly to change the preset channel
group (A to E).
3
Press G
PRESET/TUNING/CH l / h (or
3 PRESET/CH k / n) repeatedly to change
the preset channel number (1 to 8).
y
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) on the remote control.
Before performing the following operations, set the operation
mode selector on the remote control to CSOURCE and then
press 1XM.
A L L C H S E A R C H
C A T S E A R C H
P R E S E T S E A R C H