Yamaha RX-V1800 User Manual
Page 43
39
En
Optimizing the speaker setting for your listening room
PRE
P
ARA
T
ION
English
6
Press 3l / h repeatedly to toggle between
the setup result displays.
y
• Press 3k / n to toggle between the parameters in the
result.
• If you are not satisfied with the results or want to manually
adjust each parameter, run “MANUAL SETUP” (see
page 75).
• If you change speakers, speaker positions, or the layout of
your listening environment, run “AUTO SETUP” again to
recalibrate your system.
• The distances displayed in the “DISTANCE” results may
be longer than the actual distance depending on the
characteristics of your subwoofer or external amplifiers if
you connect them.
• In the “EQUALIZING” results, different values may be set
for the same band to provide finer adjustments.
7
Press 3
ENTER to return to the top result
display.
8
Press 3l / h to select “SET” or “CANCEL”.
Choices: SET, CANCEL
• Select “SET” to confirm the “AUTO SETUP”
results.
• Select “CANCEL” to cancel the “AUTO SETUP”
results.
9
Press 3
ENTER to confirm your selection.
The top “SET MENU” display appears in the OSD.
10
Press F
SET MENU to exit from “SET
MENU”.
• After you have completed the automatic setup procedure, be
sure to disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat. Keep it away
from direct sunlight and do not place it on top of this unit.
Notes
Results of the speaker
connection and wiring
Results of the speaker distance
from the listening position
Results of the speaker detection
and size
Results of the parametric
equalizer of each speaker
Results of the speaker output
level
[ ]/[ ]:
[ENTER]:
[
p
AUTO SETUP
RESULT
SP
:
5/4/0.1
DIST:
14.0/17.0ft
LVL : -10.0/+5.0dB
>SET
CANCEL
UP/DOWN
Enter
.
Notes
SYSTEM MEMORY feature
You can save multiple result of the automatic setup by using
the SYSTEM MEMORY feature. See page 96 for details.
[ ]/[ ]:
[ENTER]:
[
p
AUTO SETUP
RESULT
SP
:
5/4/0.1
DIST:
14.0/17.0ft
LVL : -10.0/+5.0dB
>SET
CANCEL
UP/DOWN
Enter
.
[ ]/[ ]:
[ENTER]:
[
p
SET MENU
;AUTO SETUP
;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
UP/DOWN
Enter
.
.