Yamaha RX-V1800 - Manual (Page 101)

97
En
Saving and recalling the system settings (SYSTEM MEMORY)
AD
V
ANCED
OPERA
T
ION
English
4
Press 3l / h repeatedly to select the
desired memory number (“MEMORY1” to
“MEMORY6”).
y
• System settings are already stored in the selected memory
number, the stored system parameter settings appear in the
menu screen. “EMPTY” appears in the menu screen if no
system settings are stored in the selected memory number.
• System settings are already saved in the selected memory
number, this unit overwrite the old system settings.
• If you save the system settings to “MEMORY1” to
“MEMORY4”, you can load the stored settings by
pressing the corresponding MSYSTEM MEMORY
buttons (see page 97).
5
Press 3
ENTER to save the current system
settings to the selected memory number.
6
Press F
SET MENU again to exit from “SET
MENU”.
■ Loading by the MSYSTEM MEMORY
buttons
You can recall the system settings stored in “MEMORY1”
to “MEMORY4” by pressing the corresponding
M
SYSTEM MEMORY buttons.
1
Press one of the
M SYSTEM MEMORY
buttons on the remote control to select the
desired memory number.
“MEMORY 1 LOAD” (example) appears in the front
panel display.
y
“EMPTY” appears in the menu screen if no system settings
are stored in the selected memory number.
2
Press the selected M
SYSTEM MEMORY
button once more to confirm the selection.
This unit loads the settings stored in the selected
memory number.
■ Loading by the SET MENU operation
1
Press F
SET MENU on the remote control.
The top “SET MENU” display appears in the OSD.
2
Press 3n to select “SYSTEM MEMORY” and
then press 3
ENTER.
The “SYSTEM MEMORY” menu appears in the
OSD.
3
Press 3
ENTER to select “LOAD”.
The following menu appears in the OSD.
4
Press 3l / h repeatedly to select the
desired memory number where the system
settings are stored and then press
3
ENTER.
This unit loads the selected system settings.
5
Press F
SET MENU to exit from “SET
MENU”.
Loading the stored system settings
• Before performing the following operations, set the
operation mode selector on the remote control to CAMP.
• This unit overwrites the stored settings to the current
settings of this unit. If you do not want to erase the current
settings, save the current settings to any SYSTEM
MEMORY number in advance.
[p]/[[]:
[ENTER]:
SYSTEM MEMORY
SAVE;;;;;;;MEMORY1
Drama
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;GEQ
YPAO PEQ ;;;;;;NONE
Select
Return
.
Stored system parameters in the
selected memory number
4 3 2 1
SYSTEM MEMORY
[p]/[[]:
[ENTER]:
SYSTEM MEMORY
LOAD;;;;;;;CURRENT
Church in Freiburg
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;PEQ
YPAO PEQ;;;NATURAL
Select
Return
.
[p]/[[]:
[ENTER]:
SYSTEM MEMORY
LOAD;;;;;;;MEMORY6
Straight
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;PEQ
YPAO PEQ;;;;;;FLAT
Select
Load
.