Yamaha RX-V1800 - Manual (Page 26)

22
En
Connections
■ HDMI signal compatibility with this unit
Audio signals
y
• If the input source component can decode the bitstream audio
signals of audio commentaries, you can play back the audio
sources with the audio commentaries mixed down by using the
following connections:
– multi-channel analog audio input (see page 30)
– DIGITAL INPUT OPTICAL (or COAXIAL)
• Refer to the supplied instruction manuals of the input source
component, and set the component appropriately.
• When CPPM copy-protected DVD audio is played back, video
and audio signals may not be output depending on the type of
the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
• To decode the audio bitstream signals on this unit, set the input
source component appropriately so that the component outputs
the audio bitstream signals directly (does not decode the
bitstream signals on the component). Refer to the supplied
instruction manuals for details.
• This unit is not compatible with the audio commentary features
(for example, the special audio contents downloaded via
Internet) of Blu-ray Disc or HD DVD. This unit does not play
back the audio commentaries of the Blu-ray Disc or HD DVD
contents.
Video signals
This unit is compatible with the video signals of the
following resolutions:
Video signal format
– 480i/576i
– 480p/576p
– 720p
– 1080i
– 1080p
Refresh rate
– 59.94(60)/50 Hz
This unit also accepts 30 or 36-bit Deep Color video
signal.
Audio signal
types
Audio signal
formats
Compatible
media
2ch Linear
PCM 2ch, 32-192 kHz,
16/20/24 bit CD, DVD-Video,
DVD-Audio, etc.
Multi-ch
Linear PCM 8ch, 32-192 kHz,
16/20/24 bit DVD-Audio, etc.
DSD 2/5.1ch,
2.8224 MHz,1 bit SACD, etc.
Bitstream Dolby Digital,
DTS DVD-Video, etc.
Bitstream (High
definition audio) Dolby TrueHD,
Dolby Digital Plus,
DTS-HD Master
Audio, DTS-HD
High Resolution
Audio Blu-ray Disc,
HD DVD, etc.
Notes