Zoom 10BaseT - Manual (Page 35)

Appendix A: Front Panel Information 31
Appendix
A
Front Panel Information
After you’ve correctly installed the Zoom Cable Modem, the
READY READY READY READY light, 10BT 10BT 10BT 10BT light, and SYNC SYNC SYNC SYNC light go on to indicate that
the modem is fully operational.
Light Mode Status
READY READY READY READY On Power is on.
10BT 10BT 10BT 10BT On The 10BaseT/Ethernet Cable
Modem is connected to the
computer (the computer must be
turned on).
ACT ACT ACT ACT Blinking Activity is present on the cable.
The cable modem is sending
data to the cable service provider
or receiving data from it.
This light flickers during the
synchronization process.
SYNC SYNC SYNC SYNC Blinking Fast Searching for a data channel
from the cable provider.
Blinking Slow Synchronizing with the cable
network and adjusting the signal
for optimum performance.
Steady On The modem is synchronized to
the cable network.