Yamaha RDX-E700 - Manual (Page 18)

ADJUSTING THE CLOCK
16
1
Press TIMER on the front panel to select
“TIME” and then press MULTI JOG.
2
Rotate MULTI JOG to adjust the hour and
then press MULTI JOG.
3
Rotate MULTI JOG to adjust the minute and
then press MULTI JOG.
4
Press MULTI JOG again to set the time.
You cannot set timer unless you adjust the clock.
You can set the timer function so that the DVD receiver turns on at the specified time and begins to play the selected input
source automatically.
1
Press TIMER on the front panel to select
“TIMER” and then press MULTI JOG.
2
Rotate MULTI JOG clockwise to select
“TIMER ON” and then press MULTI JOG.
The current timer setting is displayed.
3
Set the time that timer play begins using the
MULTI JOG, and then press MULTI JOG.
4
Rotate MULTI JOG to select the input source
to be played and then press MULTI JOG.
5
Rotate MULTI JOG to set the duration (30 to
90 min) and then press MULTI JOG.
You can set the duration in 10 minutes steps.
■ To cancel the timer
Select “TIMER OFF” in step 2.
ADJUSTING THE CLOCK
MULTI JOG
STANDBY/ON
PHONES TIMER DISPLAY SOUND MODE
VOLUME
INPUT
PUSH-ENTER
MULTI JOG
MULTI JOG TIMER
Note
SETTING THE TIMER
STANDBY/ON
PHONES TIMER DISPLAY SOUND MODE
VOLUME
INPUT
PUSH-ENTER
MULTI JOG
MULTI JOG TIMER