Xerox 1235 - Manual (Page 52)

36 Phaser 1235 Color Printer
Automatic 2-Sided Printing From the
Paper Tray
For best results with automatic 2-sided printing, do not use heavy
toner coverage on the even-numbered pages of your print job.
Automatic 2-sided printing is available from all trays; it is not
available from the Multi-Sheet Bypass Feeder. To use automatic
2-sided printing, the duplex option must be installed in the printer.
For best results with 2-sided printing, use 90 g/m
2
(24 lb. bond) laser
paper.
Automatic 2-sided printing is available only on Legal, Letter, A4, A5,
Folio, Executive and JIS B5 paper sizes, with a paper weight between
75
- 105 g/m
2
(20 - 28 lb.).
Caution
Any damage that is caused due to the use of unsupported
media is not covered by your printer’s warranty. Use only
laser bond paper for automatic 2-sided printing in the
Universal Tray. Do not use any specialty media (such as
glossy coated paper) to print automatic 2-sided printing.
1. Load 75 - 105 g/m
2
(20 - 28 lb. bond) paper in the Universal Tray.
For letterhead printing:
Place the first side to be printed face-up with the top of the page
toward the back of the printer.
2. Re-insert the Universal Tray.
Phaser 1235
0730-35
2-Sided Prints