Xerox 1235 User Manual
Page 11
■
Place the printer on a level, solid surface with adequate strength for the weight of
the machine. The base printer weight without any packaging materials is 51 kg
(113 pounds).
■
The printer is heavy, and must be lifted by two people. The illustration below
shows the proper technique for lifting the printer.
■
Exercise care in moving or relocating the printer, it is front-heavy and could tip
forward. Follow the recommended procedure when moving the printer from one
location to another. Refer to the Phaser 1235 Setup Instructions.
■
Do not place any liquids on the printer.
Warning
Be careful when working in areas inside the printer identified with a
warning symbol. These areas may be very hot and could cause personal
injury.
■
Wait 10-15 seconds between switching the printer off and on.
■
Keep hands, hair, neckties, etc., away from the exit feed rollers.
While printing, do not remove:
■
the media source tray that you have selected in the driver or front panel
■
any trays above the currently selected media source tray.
51 kg
113 lbs.
0730-01
0730-02