Xerox 1235 - Manual (Page 43)

User Guide 27
■ When sending a Multi-Sheet Bypass Feeder (MBF) job from the
driver, the printer prompts you to load the correct media if the
media does not match what you previously loaded.
■ If a different media size is loaded in the MBF than what is
selected in the driver, the printer stops and the front panel
prompts you to load the correct media size in the MBF.
Loading the Multi-Sheet Bypass Feeder (MBF)
1. Open the Multi-Sheet Bypass Feeder tray and unfold the single
extension
(a) .
2. Open the Face-up output bin at the rear of the printer and swing
out the two extensions where the media will exit
(b) .
■
The Multi-Sheet Bypass Feeder (MBF) does not automatically
detect paper size.
■
Automatic 2-Sided Printing is not available with the
Multi-Sheet Bypass Feeder.
3. Insert the media and adjust the guide for the media width:
■
For Xerox Phaser 35 Series Transparencies, refer to page 30.
■
For Xerox Phaser Color Laser Labels, refer to page 34.
b
a
0730-30
Multi-Sheet Bypass Feeder