ZyXEL Communications Prestige 623ME-T - Manual (Page 68)

Prestige 623ME-T User’s Guide
7-2 Remote Management Configuration
7.1.2 Remote Management and NAT
When NAT is enabled:
Use the Prestige’s WAN IP address when configuring from the WAN.
Use the Prestige’s LAN IP address when configuring from the LAN.
7.1.3 System Timeout
There is a system timeout of five minutes (three hundred seconds) for either the console port or
telnet/web/FTP connections. Your Prestige automatically logs you out if you do nothing in this timeout
period, except when it is continuously updating the status in menu 24.1 or when sys stdio has been
changed on the command line.
7.2 Telnet
You can configure your Prestige for remote Telnet access as shown next.
Figure 7-1 Telnet Configuration on a TCP/IP Network
7.3 FTP
You can upload and download Prestige firmware and configuration files using FTP. To use this feature, your
computer must have an FTP client.