beautypg.com

ZyXEL Communications Prestige 623ME-T User Manual

Page 111

background image

Prestige 623ME-T User’s Guide

Internet Access

13-3

Table 13-1 Menu 4 Internet Access Setup

FIELD DESCRIPTION

EXAMPLE

Multiplexing

Press [

SPACE BAR

] to select the method of multiplexing

used by your ISP. Choices are VC-based or LLC-based.

LLC-based

VPI #

Enter the Virtual Path Identifier (VPI) assigned to you.

8

VCI #

Enter the Virtual Channel Identifier (VCI) assigned to you.

35

ATM QoS Type

Press [SPACE BAR] and select CBR (Continuous Bit Rate) to
specify fixed (always-on) bandwidth. Select UBR (Unspecified
Bit Rate) for applications that are non-time sensitive, such as
e-mail. Select VBR (Variable Bit Rate) for bursty traffic and
bandwidth sharing with other applications.

UBR

Peak Cell Rate (PCR) This is the maximum rate at which the sender can send cells.

Type the PCR.

0

Sustain Cell Rate

(SCR)

Sustained Cell Rate is the mean cell rate of a bursty, on-off
traffic source that can be sent at the peak rate, and a
parameter for burst-type traffic. Type the SCR; it must be less
than the PCR.

0

Maximum Burst Size

(MBS)

Refers to the maximum number of cells that can be sent at the
peak rate. Type the MBS. The MBS must be less than 65535.

0

My Login

Configure the My Login and My Password fields for PPPoA
and PPPoE encapsulation only. Enter the login name that your
ISP gives you. If you are using PPPoE encapsulation, then this
field must be of the form

user@domain

where domain

identifies your PPPoE service name.

N/A

My Password

Enter the password associated with the login name above.

N/A

Idle Timeout

This value specifies the number of idle seconds that elapse
before the Prestige automatically disconnects the PPPoE
session.

0

IP Address
Assignment

Press [

SPACE BAR

] to select Static or Dynamic address

assignment.

Dynamic

IP Address Enter the IP address supplied by your ISP if applicable.

N/A

Network Address
Translation

Press [

SPACE BAR

] to select None, SUA Only or Full

Feature. Please see the NAT Chapter for more details on the
SUA (Single User Account) feature.

SUA Only