ZyXEL Communications Prestige 623ME-T - Manual (Page 168)

Prestige 623ME-T User’s Guide
20-2 System Information and Diagnosis
The following table describes the fields present in Menu 24.1 — System Maintenance — Status which
are read-only and meant for diagnostic purposes.
Figure 20-2 Menu 24.1 System Maintenance : Status
The following table describes the fields present in Menu 24.1 — System Maintenance — Status.
Table 20-1 Menu 24.1 System Maintenance : Status
FIELD DESCRIPTION
Node-Lnk This is the node index number and link type.
Status This shows the status of the remote node.
TxPkts The number of transmitted packets to this remote node.
RxPkts The number of received packets from this remote node.
Errors The number of error packets on this connection.
Tx B/s This shows the transmission rate in bytes per second.
Rx B/s This shows the receiving rate in bytes per second.
Up Time This is the time this channel has been connected to the current remote node.
My WAN IP
(from ISP) This is the IP address of the ISP remote node.
Ethernet This is the Ethernet or USB port. Press [TAB] to toggle between Ethernet and USB
port status display.
Menu 24.1 - System Maintenance - Status 07:05:39
Sat. Jan. 01, 2000
Node-Lnk Status TxPkts RxPkts Errors Tx B/s Rx B/s Up Time
1-PPPoE Idle 0 0 0 0 0 0:00:00
2 N/A 0 0 0 0 0 0:00:00
3 N/A 0 0 0 0 0 0:00:00
4 N/A 0 0 0 0 0 0:00:00
5 N/A 0 0 0 0 0 0:00:00
6 N/A 0 0 0 0 0 0:00:00
7 N/A 0 0 0 0 0 0:00:00
8 N/A 0 0 0 0 0 0:00:00
My WAN IP (from ISP): 0.0.0.0
Ethernet: WAN:
Status: 100M/Full Duplex Tx Pkts: 2074 Line Status: Down
Collisions: 0 Rx Pkts: 2665 Upstream Speed: 0 kbps
CPU Load = 16.44% Downstream Speed: 0 kbps
Press Command:
COMMANDS: 1-Reset Counters TAB-Next Page ESC-Exit