ZyXEL Communications Prestige 623ME-T - Manual (Page 53)

Prestige 623ME-T User’s Guide
LAN Setup 4-5
Table 4-1 LAN
LABEL DESCRIPTION
Client IP Pool Starting
Address This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP Pool This field specifies the size or count of the IP address pool.
Primary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
Secondary DNS Server As above.
Remote DHCP Server If Relay is selected in the DHCP field above then enter the IP address of the
actual remote DHCP server here.
TCP/IP
IP Address Enter the IP address of your Prestige in dotted decimal notation, for example,
192.168.1.1 (factory default).
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
RIP Direction Select the RIP direction from None, Both, In Only and Out Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to
establish membership in a multicast group. The Prestige supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Apply Click Apply to save your changes back to the Prestige.
Cancel Click Cancel to reload the previous configuration for this screen.