ZyXEL Communications Prestige 623ME-T - Manual (Page 167)

Prestige 623ME-T User’s Guide
System Information and Diagnosis 20-1
Chapter 20
System Information and Diagnosis
This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4 and menu
24.8.
20.1 System Maintenance Overview
These tools include updates on system status, port status, log and trace capabilities and upgrades for the
system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu to open Menu 24 – System Maintenance, as shown in the following figure.
Figure 20-1 Menu 24 System Maintenance
20.2 System Status
The first selection, System Status gives you information on the status and statistics of the ports, as shown
next. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you
information on your ADSL telephone line status, number of packets sent and received.
To get to System Status, type 24 to go to Menu 24 — System Maintenance. From this menu, type 1.
System Status. There are two commands in Menu 24.1 — System Maintenance — Status. Entering 1
resets the counters; pressing [TAB] toggles between Ethernet and USB port status display and [ESC] takes
you back to the previous screen.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number: