Xerox DocuColor 12CP - Manual (Page 27)

IN-LINE STAPLER FINISHER USER GUIDE 23
2 Do one of the following:
•
If paper is visible in the Interface Area,
remove the paper and proceed to step 5
(Figure 10).
•
If no paper is visible in the Interface Area,
proceed to step 3.
Figure 10: Removing paper from the Interface
Area
3 Open the copier/printer Right Door and remove
the jammed paper (Figure 11).
4 Close the copier/printer Right Door.
5 Slide the Finisher to the left.
•
Ensure that the Finisher slides all the way to
the left and that the paper jam message is no
longer displayed on the copier/printer Touch
Screen.
Figure 11: Removing paper behind the copier/
printer Right Door