Xerox DocuColor 12CP - Manual (Page 23)

IN-LINE STAPLER FINISHER USER GUIDE 19
Adding staples
Check the printer regularly and load a new Staple Pack when needed.
Ensure that you have a new Finisher Staple Pack on hand before beginning this
procedure. Do not use a Convenience Staple Cartridge. The staples are not
interchangeable.
NOTE: The Finisher Staple Cartridge is reusable and should not be thrown away.
1 Open the Finisher Front Door, located on the
lower right front of the Finisher.
2 Squeeze the Gold Release Latch until the Staple
Cartridge is released (Figure 3).
Figure 3: Pressing the Gold Release Latch
3 Lift the Staple Cartridge slightly and remove it
from the cartridge holder (Figure 4).
Figure 4: Removing the Staple Cartridge