Xerox DocuColor 12CP - Manual (Page 16)

12 IN-LINE STAPLER FINISHER USER GUIDE
Printing procedures
When you are ready to print your job, follow the procedure for your operating system. The
steps shown may vary depending on the application you are using.
NOTE: The procedures in this section apply to the Document Centre ColorSeries 50
copier/printer. For the DocuColor 12 copier/printer, refer to the product manual supplied by
the manufacturer of the Digital Front End connected to your DocuColor 12.
From Windows 2000
1 Open your document.
2 From the File menu, select Print.
3 In the Select Printer box, select your printer name.
4 From the Layout and Paper Quality tabs, select the desired print settings.
5 From either the Layout or Paper Quality tab, click on the Advanced button.
6 Click on Document Options.
7 Click on Staple.
8 In the Staple drop-down list box, select the desired staple option.
9 Click OK to return to the Print dialog box.
10 Click Print to print your job.