Xerox DocuColor 12CP - Manual (Page 15)

IN-LINE STAPLER FINISHER USER GUIDE 11
Stapling mixed size documents
Documents containing different page sizes can be stapled if:
•
all of the sizes in the document are supported by the Finisher
•
the feed edge (front to rear) of each paper is the same length.
The Finisher accepts the following mixed media sizes:
A4 LEF with A3 SEF B5 LEF with B4 SEF
8.5 x 11 LEF with 11 x 17 SEF 8.5 x 11 SEF with 8.5 x 13 SEF and 8.5 x 14 SEF
If a print job includes incompatible paper sizes, it will be delivered unstapled to the Center
Output Tray.
Rotate Page
The Rotate Page option allows you to rotate an image 180 degrees. This option is located
in the same drop-down list box as the Staple option. The following are some examples of
when you might use this option:
•
The application you are using may be rotating the image. Use Rotate Page to reverse the rotation.
•
Your stapling job requires an unconventional staple placement.
The table below shows the output for the staple options with Rotate Page for 8.5 x 11 or
A4 paper.
Printer driver selection Finished example
1 Staple Portrait
1 Staple Landscape
8.5 x 11 A4
2 Staples Portrait, Long Edge
2 Staples Landscape, Long Edge
2 Staples Portrait, Short Edge
2 Staples Landscape, Short Edge
Table 2: Stapling options with Rotate Page
F
F FF
F
FF
F
F