Xantrex Technology 175 PLUS - Manual (Page 16)

15
XPower 400 Plus Two AC receptacles are located on one
end of the XPower 400 Plus. You can plug in any 120-volt
appliances with a combined total power consumption of 320
watts or less when the inverter is turned on.
XPower 700 Plus Two AC receptacles are located on one
end of the XPower 700 Plus. You can plug in any 120-volt
appliances with a combined total power consumption of 560
watts or less when the inverter is turned on.
On/Off Switch When the On/Off switch is on, AC power is
available at the outlet.
POWER Light The green POWER light indicates that AC
power is present at the outlet and that the XPower is operating
normally.
FAULT Light The red FAULT light indicates that the inverter
has shut down. Shutdown is caused by low or high battery
voltage, overload, or excessively high temperatures.
Audible Alarm An audible alarm warns of an impending low
voltage shutdown.
2
3
4