Xerox 2060 - Manual (Page 77)

Supplies
System Overview Guide A-7
Example: (See the shaded rows in the table above.) If you want
to move ten cartons of paper from a storage area with a
temperature of 90
o
F to an operating area with a temperature of
75
o
F (a 15
o
difference), you should do so at least 14 hours
before using the paper.
Other supplies
This section describes the supplies other than paper that are
necessary for installation and afterward. Your sales
representative will help you place your initial supply order.
Fuser lubricant
Fuser lubricant is a consumable item required by the printer. You
should keep at least two boxes (each box contains two tubes) on
hand for installation by the service representative. The
consumption rate of Xerox fuser lubricant is approximately one
tube per 50,000 pages. For product information, refer to the
consumable supplies table in this appendix.
Table A-2. Paper conditioning: Recommended temperature
differences between storage and operating areas
Temperature differences between storage and
operating areas
Fahrenheit
10
o
15
o
20
o
25
o
30
o
40
o
50
o
Centigrade
5.5
o
8.5
o
11
o
13
o
17
o
22
o
28
o
Cartons Hours
1 4 8 11 14 17 24 34
5 5 9 12 15 18 25 35
10 8 14 18 22 27 38 51
20 11 16 23 28 35 48 67
40 14 19 26 32 38 54 75