Xerox 2060 - Manual (Page 50)

Printer components and options
3-16 System Overview Guide
Figure 3-13. Xerox DocuColor 2060 NPS/IPS high-capacity
feeder
1. Control panel
2. Left door
3. Right door
Tray capacity The high-capacity feeder tray holds 2500 sheets of 24-pound or
90 gsm bond paper.
NOTE: Do NOT fill above the MAX line.
Paper stock
specifications
Tray 4 is designed to feed the commonly used paper sizes and
weights.
There are two positions in which paper is fed into the printer. One
of the positions is called long edge feed (LEF). Long edge refers
to the long edge of your paper. When you see LEF, position your
paper so that the long edge is fed first. The other position is
called short edge feed (SEF). Short edge refers to the short
edge of your paper. When you see SEF, position your paper so
that the short edge is fed first.
Special paper stock for tray 4 includes:
• Labels can be run, but are not recommended for tray 4
• Letterhead
• Drilled (hole punched) is not recommended to be run from
tray 4, but can be fed SEF
• Colored paper
• Coated and non-coated paper