Xerox 2060 - Manual (Page 52)

Printer components and options
3-18 System Overview Guide
High-capacity stacker modes
The High-capacity stacker offers the following options for output.
Top Tray mode The High-capacity stacker diverts sheets that are too small or too
large to be stacked and proof sets to the top tray. The capacity of
the top tray is 250 sheets of 24 pound (90 gsm) paper.
NOTE: When printing labels the back sometimes comes off
when using the Stack mode. Use the Top Tray mode when
printing labels to avoid this problem.
Stack mode Stacks collated sets as received from the printer. The stacker
tray has a capacity of 3500 sheets of 24 pound (90 gsm) paper.
NOTE: When printing labels the back sometimes comes off
when using the Stack mode. Use the Top Tray mode when
printing labels to avoid this problem.
High-capacity stacker stapler
The high-capacity stacker stapler is an optional finishing device
that provides stacking, stapling, and offsetting capabilities for
output into a stacker cart.
NOTE: The Xerox DocuColor 2060 NPS/IPS can have a high-
capacity stacker (HCS) or a high-capacity stacker stapler
(HCSS), but not both.