Xerox 2060 - Manual (Page 53)

Printer components and options
System Overview Guide 3-19
Figure 3-15. High-capacity stacker stapler (HCSS)
1. Control panel
2. Top tray
3. Offset catch tray
Tray capacity The HCSS offset catch tray has a capacity of 2000 sheets of 24
pound (90 gsm) paper. It has an offset mode that provides
separation between the stacked sets. The HCSS can also send
output to the Top Tray.
High-capacity stacker stapler modes
The High-capacity stacker stapler offers the following options for
output.
Top Tray mode Sends each print to the top tray of the HCSS. The top tray also
accepts sheets that are diverted to it during a problem, and when
the system is in the job recovery mode. The top tray holds a
maximum of 250 sheets of 24 lb. (90 gsm) paper.
Stack mode Stacks collated sets as received from the printer in the offset
catch tray. The offset catch tray has a capacity of 2000 sheets of
24 pound (90 gsm) paper.
Staple mode Staples each set and delivers it to the offset stacker stapler tray.