Xerox DOCUCOLOR M123 - Manual (Page 5)

WorkCentre M128/M123 Reference Guide Page 5
dc05cc0364
Feature Implementation Values
Media
Selection
<
value>>
setpagedevice
Where value is one of the following:
true* = Deferred media selection by
output device (more powerful and flexible
media selection)
false = Immediate media selection by
strict setpagedevice operator
Resolution < [x y]>>
setpagedevice
Where x and y are one of the following:
600 600*(dpi)
1200 1200
Duplex < value>>
setpagedevice
Where value is one of the following:
true = Duplex
false* = Simplex
Tumble < value>>
setpagedevice
This feature is effective only in
conjunction with Duplex = true.
Where value is one of the following:
true = Tumble (Short edge binding
Duplex)
false* = Duplex (Long edge binding
Duplex)
Image
Enhancement
<
/PostRenderingEnhanceDetails
<< /Type 32 /REValue int >>
>>
setpagedevice
Where int is one of the following:
0 = No image enhancement
1* = Activate image enhancement
Toner Save <
/PostRenderingEnhanceDetails
<< /Type 32 /TonerSaver int >>
>>
setpagedevice
Where int is one of the following:
0* = No toner saving
1 = Lighten output density, toner saving
Halftone
Screen
Selection
<
/PostRenderingEnhanceDetails
<< /Type 32 /EngineScreen int >>
>>
setpagedevice
Where int is one of the following:
0* = Low frequency screen
1 = High frequency screen
2 = Compatible screen with FX standard
PDL’s
Output
Location
<string)>>
setpagedevice
Where string is one of the following:
CENTER TRAY: facedown tray #1 (w/o
finisher)
CENTER TRAY2: facedown tray #2 (w/
finisher)
SIDE TRAY: faceup tray
FINISHER TRAY1: finisher tray
Null = Not specified