Xerox DOCUCOLOR M123 - Manual (Page 12)

Page 12 WorkCentre M128/M123 Reference Guide
dc05cc0364
PCL/PJL Implementation
This section includes the PCL commands for specific features. The following
table lists each feature and the PCL syntax required to use the feature.
Following the table are examples of how to use these commands and the PCL
file.
Refer to these reference materials: PCL5 Printer Language Technical
Reference Manual and Printer Job Language Technical Reference Manual,
Hewlett-Packard Manual.
Feature Implementation Values
Job Name
＠PJL SET JOBNAME =
“jobname-string”
Where jobname-string is a maximum of
32 characters
Exclude
「”」(22H) character
Custom Paper
Size –
available only
for PCL
Not in PJL command.
Use PCL to specify:
&l101A
Width of Custom Paper is specified by
*c#X where # = decipoints for
(100 - 305) mm.
Length of Custom Paper is specified by
*c#Y where # = decipoints for
(140 - 482) mm.
For instance:
4.25-inch x 5.5-inch produces
*c3060X3960Y
4.25-inch x 720 decipoints/inch = 3060
and
5.5-inch x 720 decipoints/inch = 3960.
Media Size @PJL SET PAPER = value Where value is one of the following:
B4
B5
LETTER = 8.5x11
LEGAL = 8.5x14
A4
JISEXEC
LEDGER = 11x17
A3
CUSTOM = Custom paper
A5
ROC8 = 8Kai
KROK16K = 16Kai