Xerox M20/M20i - Manual (Page 57)

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-5
Copy
Enter the Quantity
" The maximum
copy quantity is
999.
" You can cancel a
copy job while it is
copying by
pressing the
[Stop] key twice.
Press Start
5
Numeric Keypad
Clear/Clear All
! Use the Numeric Keypad to enter
the number of copies required.
! If necessary, press [Clear/Clear
All] to clear the current quantity
and enter a new quantity.
6
! Press [Start] to begin the copy
job.
! If Collated is On, when the
document is fed from the
Document Glass, the display
shows [Scan Another?].
! To scan another original, load the
next original and using the
Navigation Keys select [Yes] and
press [Enter].
Continue the procedure until all
the originals have been scanned.
! Select [No] when all the originals
have been scanned, and press
[Enter].
Printing commences and copies
are delivered to the Output Tray.
Navigation Keys Start