Xerox M20/M20i - Manual (Page 163)

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 9-23
M
a
chin
e Admin
istra
tion
Change the Passcode
This procedure is used to change an existing passcode or to enter a passcode after Passcode
Protect has been enabled.
1
! Press the [Machine Status] key.
2
! Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
! If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
! Select [Change Passcode] using
the Navigation Keys and press
[Enter].
! Enter the existing passcode and
press [Enter].
#
This will be blank if you have just
enabled Passcode Protection
System Admin Tools
[Change Passcode]
4
! Enter the new passcode and
press [Enter].
Enter Passcode: