Yamaha DRX-2 - Manual (Page 36)

31 Playback
6.
Playback
With this DVD recorder you can play back the following systems:
•) DVD Video
•) (Super) Video CD Disc
•) DVD+RW Disc
•) DVD+R Disc
•) DVD-RW (video mode, finalized)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3 CD
You can operate the video recorder using the remote control or the buttons on the
front of the DVD recorder.
1 Press the F (Open/Close) button on the front. The disc tray will open. While
the disc tray is opening, “OPENING” and then “TRAY OPEN” when the tray is
fully open.
2
Carefully place the disc in the tray with the label facing up and press PLAY or
F (Open/Close) “CLOSING” and then “READING” will appear in the display.
The information on the disc will be read.
3
Playback starts automatically.
General notes on playback
Problem
✘ The display will read “PIN”
✓ The child lock has been activated for the inserted disc. Read the sections on
“Child lock” and “Releasing a disc” in the chapter on “Access control (child
lock)”.
✘ The menu on the screen is showing an “X”
✓ Some DVD discs can be manufactured so that certain steps are required before
the disc can be played, or so that only limited operation is possible during play-
back. When an “X” appears on the screen the selected feature is not possible.
✘ The screen is showing regional code information
✓ Since DVD films are not normally released in all parts of the world at the same
time, all DVD players have a specific regional code. Discs can be given a regional
code. If the regional codes differ between the player and the disc, playback is not
possible.
✓ The regional code is shown on the label on the back of the machine.
✓ The regional code does not apply to recordable DVD discs.
Inserting a disc
Question
How do I insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The labelling for
each side is in the centre of the disc. To play a side its label must be facing up.
Tip
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the STOP
button on the remote control until the dialog box
shows “OPENING” or “CLOSING”.