Yamaha DRX-2 - Manual (Page 31)

Installing your DVD recorder 26
English
This function uses the information sent via the local PBS channel to automatically set
the time/date. For this reason, you must enter the PBS channel that sends this addi-
tional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is
wrong, you must manually set the date/time (see section “Manually setting the time &
date”).
1 Press SYSTEM-MENU on the remote control. The menu bar appears.
2
Select “ ” symbol with t or u.
3 Select “Installation” using w or v and confirm with u.
4
Select “Time/date” using w or v and confirm with u.
5 Select “Automatic” with w or v and confirm with u.
6
Select the corresponding line with w or v.
7 Select the channel which sends the time/date information in the line “PBS Chan-
nel” and confirm with ENTER/OK. The DVD Recorder will check whether or
not the information transfer is possible.
8 Select one of the following settings in line “Daylight Saving”:
“On”: The time set corresponds to summer time (summer time activated)
“Off”: The time set corresponds to the winter time (summer time is off)
9 In the line “Time Zone”, select your time zone if the PBS channel entered was for
a different time zone. This is the only way to set the time correctly, or, if neces-
sary, to correct it.
If you want to use the time zone of the PBS channel, select “Auto.”.
0 Confirm the changes with ENTER/OK.
A
To end, press SYSTEM-MENU.
Setting the time and date
automatically
Problem
✘ “Clock not set, check channel” will appear on the TV screen
✓ No time/date data can be received from this TV channel.
Select a different channel or “Auto.” in line “PBS Channel”.
Time/date
Automatic
PBS Channel Auto.
Daylight Saving Off
Time Zone Auto.
To exit press
SYSTEM MENU