ZyXEL Communications 2WG - Manual (Page 201)

ZyWALL 2WG Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
201
1. Setup ZyWALL VPN Client
2. Setup ZyWALL
This page guides us to setup a VPN connection between the VPN software and ZyWALL router. There will be
several devices we need to setup for this case. They are VPN software and ZyWALL router.
As the figure shown below, the tunnel between PC 2 and ZyWALL ensures the packets flow between them is
secure. Because the packets go through the IPSec tunnel are encrypted. To setup this VPN tunnel, the required
settings for the software and ZyWALL are explained in the following sections.
The IP addresses we use in this example are as shown below.
PC 1
ZyWALL PC2
202.132.171.33
LAN: 202.132.171.1
WAN: 202.132.170.1
202.132.155.33
1. Setup ZyWALL VPN Client
1. Open ZyWALL VPN Client Security Policy Editor
2. Add a new connection named 'ZyWALL' as shown below.
3. Select Connection Security to Secure