ZyXEL Communications P-2302R-P1C - Manual (Page 70)

P2302R-P1C Support Notes
All contents Copyright

2007 ZyXEL Communications Corporation.
70
Step 8. Click on Apply to save the setting and take effect. If you would like to configure the 2nd SIP account,
please select SIP2 by using the SIP account selector than follow step 1 to 8 to complete the 2nd account setup.
Note: If more than both SIP number are associated both phone port you will not be able to identify which
account is being called for the incoming call.
Each field's detail description on this page is listed below.
Label Description
SIP Account You can configure the ZyXEL Device to use multiple SIP accounts. Select
one to configure its settings on the ZyXEL Device.
SIP Number A SIP account's Uniform Resource Identifier (URI) identifies the SIP
account in a way similar to the way an e-mail address identifies an e-mail
account. It is also known as a SIP identity or address. The format of a SIP
identity is SIP-Number@SIP-Srevice-Domain.
A SIP number is the part of the SIP URI that comes before the "@" symbol.
Enter your SIP number in this field. You can use up to 31 ASCII
characters.
SIP Local Port Use this field to configure the ZyXEL Device’s listening port for SIP. Leave
this field set to the default if you were not given a local port number for SIP.
SIP Server
Address
Type the IP address of the SIP server in this field.
SIP Server
Port
Enter the SIP server’s listening port for SIP in this field. Leave this field set
to the default if your VoIP service provider did not give you a local port
number for SIP.
REGISTER
Server
Address
A SIP register server maintains a database of SIP identity-to-IP address
(or domain name) mapping. The register server checks your user name
and password when you register.
Enter the
SIP register server’s address in this field.
If you were not given a register server address, then enter the
address from the SIP Server Address field again here.