ZyXEL Communications P-2302R-P1C - Manual (Page 109)

P2302R-P1C Support Notes
All contents Copyright

2007 ZyXEL Communications Corporation.
109
Key settings:
a. Assigned By, Choose 'IP address attached on LAN'.
b. IP Address, Enter the IP address of the PC which is installed by the ISP at the first installation.
2. Your ISP checks the 'Host Name'
Some ISPs take advantage of the 'host name' message in a DHCP packet such as @home to do the
authentication. When first installing, the ISP's tech people configure the host name as the 'Computer Name' of
the PC in the 'Networking' settings. When the ZyXEL Device is attached to the cable modem to connect to the
ISP, we should configure this host name in the ZyXEL Device's system (menu 1).
Menu 1 - General Setup
System Name= zyxel
Key Setting:
 System Name= the system name must be the same as the PC's computer name.
3. Your ISP checks 'User ID'
This authentication type is used by RoadRunner ISP; currently they use RR-TAS (Toshiba Authentication
Service) and RR-Manager authentications. You must configure the correct 'Service Type', username and
password for your ISP in menu 4.
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= Ethernet
Service Type= RR-Toshiba
My Login= cso@zyxel
My Password= ********
Retype to Confirm= N/A