Xerox DP 820 - Manual (Page 30)

Xerox DP 820 User’s Guide 25
User Controls
Advanced Menu
Auto Source Select—The projector automatically scans the
connected input sources and selects the type that is connected.
• To activate this option, select it, then press the Menu/Enter
button on the projector control panel or the
button on the
remote control.
Rear—Projects a reversed image so you can project from behind a
translucent screen.
• To activate this option, select it, then press the Menu/Enter
button on the projector control panel or the
button on the
remote control.
Ceiling—Projects an image upside down for a ceiling-mounted
projection.
• To activate this option, select it, then press the Menu/Enter
button on the projector control panel or the
button on the
remote control.
ECO Mode—Dims the projector’s lamp output to lower power
consumption and increase lamp life.
• Press the buttons to select this mode.
ON—The lamp output is reduced
OFF—The lamp output is not reduced
Lamp Hours—Displays the lamp’s elapsed operating time (in
hours) since the lamp timer was reset. The lamp hours counter that
tells you the elapsed operating time cannot be manually adjusted.
Color Space—Selects the type of input signal.
• Press the buttons to select the color space.
RGB
YCbCr
YPbPr