Xerox DP 820 - Manual (Page 22)

Xerox DP 820 User’s Guide 17
User Controls
Remote Control
Laser Beam Pointer
Button Description
Power
Turns projector power on and off.
(Enter)
When the OSD menus are displayed, selects
OSD option.
Directional Selection
Buttons
( )
When the OSD menus are displayed, scrolls
through menus and selects items or adjusts
settings.
Menu Press to display the OSD menus. Press again
to exit the OSD menus.
Laser Press to activate a laser beam for use as a
pointer. Warning—Do not look into the laser
beam or shine it into others’ eyes when using
the remote control as a laser pointer. Laser
light can seriously damage eyes.
Keystone ( + – ) Adjusts image distortion caused by tilting the
projector. Images are wider at the top or
bottom due to tilting the projector.
Not recommended for spreadsheets or text
displays to avoid text distortion.
Volume ( + – ) Adjusts volume level. Press Volume + to
increase the volume. Press
Volume – to
decrease the volume.
Mute Turns off sound. Press one of the Volume
buttons to resume sound.
Resync ( ) Adjust the frequency and phase for the
connected components to produce the
optimum projected image.
Source ( ) Manually selects an input source.
Hide Hides image being displayed and displays a
blank screen. Press again to resume display of
image. Typically used to pause a presentation.
4:3/16:9 Toggles the image aspect ratio to 4:3 or 16:9.
NOTE: The battery compartment for the remote control is on
the back. The instructions on the compartment show how to
install the batteries properly.