Scanning with the isis interface, Accessing the isis interface in quickscan – Xerox DocuMate 162 User Manual
Page 73
Scanning with the ISIS Interface
68
DocuMate 162 Scanner User’s Guide
Scanning with the ISIS
Interface
You can use the ISIS interface from QuickScan™ or any other application
that will access the ISIS driver. Note that the ISIS interface for each
application varies depending on the application. Please refer to that
software application’s User Guide for instructions on scanning with the
ISIS interface.
Accessing the ISIS Interface in QuickScan
1.
Open the QuickScan software to access the ISIS driver scanning
options.
Please note that you may see the following warning message:
2.
Please disregard this message and click Continue.
The ISIS drivers were installed correctly during the installation of your
Xerox DocuMate 162 scanner.
3.
The Scanner Selection dialog box will then open.
4.
Select Xerox DocuMate 162 from the list of scanners and click OK.
5.
Your scanner is now ready to work with QuickScan.