Loading documents to scan – Xerox DocuMate 162 User Manual
Page 24
DocuMate 162 Scanner User’s Guide
19
Scanning
Loading Documents to Scan
When you press either the Simplex or Duplex button, documents are
scanned using the scan settings indicated by the LED number. The
scanned images are then sent to a software application on your
computer.
1.
Adjust the paper guide for the width of paper, and make sure the input
and output trays are fully extended.
2.
Load the documents face down with the top of the pages inserted into
the Automatic Document Feeder.
NOTE:
Always remove any staples or paper clips from documents
before inserting them into the scanner’s Automatic Document Feeder.
Staples and paper clips can jam the feed mechanism and scratch the
internal components. Also remove any labels, stickers, or Post-It™
notes that may come off during the scanning process and get stuck in
the scanner. Misuse as described here will void your scanner’s
warranty.