Zoom ADSL X4 - Manual (Page 18)

18 ADSL X4 User's Guide
Depending on your situation, do the following:
! Select MANUALLY if one or both of the following are
true:
" You already have the VPI, VCI, and Encapsulation
settings from your Internet service provider.
" You have a static IP address that you plan use with the
X4. (Only those whose Internet service provider
instructs them to use a static IP address and advanced
users with special configuration needs will require
static IP addressing.)
To continue configuring the modem manually, skip the rest of
the steps in this section and follow the instructions on page 22
(if you are NOT using a static IP address) or on page 25 (if you
have a static IP address).
! Select AUTOMATICALLY if neither of the special
circumstances mentioned above fits your situation. When
this option is selected, the screen changes to show
automatic configuration options. Do the following:
a aa a
Select the Enable option button, then click Save
Changes.
b bb b
The page changes to the Autodetect page and a Start
button appears. Click the Start button to begin the
automatic configuration. A message appears to let you
know that the current configuration, if any, will be lost
when the X4 configures itself. Click OK to dismiss
this message.
c cc c
Wait while the X4 modem searches for the correct
VPI, VCI, and Encapsulation settings and connects
with your Internet service provider. This may take a
few minutes because the modem must try various
combinations until it finds the settings that match your
service provider’s.