Zoom RT-123 - Manual (Page 53)

For information on the MIDI channel setting procedure, see page
49.
The RT-123 produces sound according to the note numbers
received via the [MIDI IN] connector. Program change messages
can be used to switch drum kits and bass programs of the RT-123.
For information on program change numbers and corresponding
drum kits and bass programs, please refer to the "Reference"
section at the end of this manual.
53
RT-123
Application
Examples
Using a MIDI sequencer, MIDI keyboard, or similar MIDI Device you can play the built-in sound
sources of the RT-123.
Using MIDI equipment to play the RT-123
II
REAL-TIME REC
OPEN HAT
7 CLICK VOL
TOM 3
6 QUANTIZE
TOM 2
4 TIME SIG
TOM 1
2 MIX
EXTRA 1
9 FOOT SW
EXTRA 2
11 PAD SENS
EXTRA 3
13
MIDI
CLOSED HAT
5 PRE COUNT
SNARE
3 BASS TUNE
KICK
1 BASS KEY
CRASH
8 BAR LENGTH
RIDE
10 SWING
EXTRA CYMBAL
12
SHIFT FUNCTION
REPEAT/STEP
INSERT/COPY DELETE/ERASE BASS MUTE BASS DRAM A DRAM B STOP/EXIT PLAY
TEMPO
+ –
Ballad Set Basic Drum Kits Programs
STEP REC
2
2
STEP
1
Connect the MIDI OUT jack of the MIDI sequencer or other MIDI component to the
[MIDI IN] connector of the RT-123, using a MIDI cable.
STEP
2
Use the [FUNCTION] key and pad 13 (MIDI) to assign the tracks of the RT-123 to
receive MIDI channels which are matched to the send channels of the external MIDI
component.
STEP
3
Play the MIDI sequencer or keyboard.
FUNCTION
EXTRA 3
13
MIDI