Zoom RT-123 - Manual (Page 27)

27
Pattern
Recording
(Real-Time
Recording)
When the [REC] key is pressed during real-time recording, the
[REC] key LED starts to flash and pattern recording is suspended. In
this condition, tapping the pads will produce sound, but it is not
recorded. This is useful to check phrasing and sound before
actually recording.
HINT HINT
STEP
10
To erase the sound from a specific pad, push the pad while holding the
[DELETE/ERASE] key down.
While the key is held down, the sound from that pad is erased from
the pattern. To erase the entire bass track, push the [BASS] key
while holding the [DELETE/ERASE] key down. While both keys are
held down, the bass track is erased.
DELETE/ERASE
PAD
B2 pad
DELETE/ERASE DELETE/ERASE BASS
STEP
11
When recording is completed, press the [STOP/EXIT] key.
STOP/EXIT