Zoom RT-123 User Manual

Page 32

that pad is entered, and the position proceeds to the next step.

• Enter the minimum unit rest: Briefly tap the [REPEAT/STEP] key

and release it. A rest of the selected minimum duration is
entered, and the position proceeds to the next step.

• Enter a note longer than the minimum unit: Hold the pad down

and repeatedly press the [REPEAT/STEP] key. With each push of
the [REPEAT/STEP] key, the immediately preceding note is
extended by one unit.

When you press a pad, its LED lights up, indicating that the note
has been input. The display shows the current position in the
pattern (measure/beat).

Pattern

Recording

(Step

Recording)

A note longer than the entire pattern cannot be input. When the
input exceeds the pattern length, the note will only be as long as the
pattern.

NOTE

REPEAT/STEP

Hold down

PAD

[STEP]

As you move the position with the [REPEAT/STEP] key, the LED of
a pad that has been input for the current position lights up.
Pressing the pad while holding the [DELETE/ERASE] key down
causes the LED to go out and the note will be erased.

Then press the corresponding pad while holding down the
[DELETE/ERASE] key.

The [REC] key LED goes out, and step recording ends.

STEP

To erase a note, use the [REPEAT/STEP] key to move to the desired position. Then
press the corresponding pad while holding down the [DELETE/ERASE] key.

Bass track

[B2]

DELETE/ERASE

[B2]

Bass track

Note duration

DELETE/ERASE

STEP

To decrease the length of a note, use the [REPEAT/STEP] key to move to the
position where the note should stop.

STEP

When recording is completed, press the [STOP/EXIT] key.

During step recording, erasing the entire track is not possible.

NOTE