Sing, Set temperature (optional), Start oven – Whirlpool KEBS247D User Manual
Page 25: Press you see, Start, Continued on next page
25
7. Set temperature (optional).
Do this step if you want to set an oven
temperature other than the one dis-
played.
NOTE:
See a reliable cookbook or your
convection oven cookbook for oven
temperature recommendations.
8. Start oven.
NOTES:
•
If you do not choose a cook setting
and press START, the oven will default
to bake at 350°F and start. If you want
to cook with another setting or at
another temperature, do Steps 6 and 7
and press START.
•
The oven temperature display will
show the set oven temperature
throughout temperature probe cooking.
•
After the food temperature reaches
130°F, the probe display will show the
actual food temperature at each 5°F
increase and stop at the set tempera-
ture. Four tones will sound (if tones are
not disabled, see page 8) and “End”
will show when food reaches the set
temperature. The oven then shuts off.
•
If you want to change the probe
temperature after cooking has begun:
– Unplug the probe, then plug it back
in. You will be prompted for a new
probe temperature. Next, repeat
Steps 5 and 8 in that order. You may
also change the oven temperature at
this point by pressing the desired
cook setting pad again.
OR
– Press Start pad and repeat steps
5-8, in that order. You may also
change the oven temperature at this
point by pressing the desired cook
setting pad again.
PRESS
YOU SEE
NIGHT LIGHT
DELAY
SET
RAISING
BREAD
ON
COOK
DEHYDRATE
TIME
COOK TEMP
CLEAN TIME
STANDARD
ENTER
CONVECTION
PROBE TEMP
FOOD AT
CHECK
DOOR
CLOSE
EASYCONVECT
O
F
(example shows 375°F
temperature setting)
3
7
5
PRESS
YOU SEE
NIGHT LIGHT
DELAY
SET
RAISING
BREAD
O
ON
COOK
DEHYDRATE
TIME
COOK TEMP
CLEAN TIME
STANDARD
ENTER
CONVECTION
PROBE TEMP
FOOD AT
CHECK
DOOR
CLOSE
EASYCONVECT
(example for Bake)
START
U
sing
Y
our
O
ven
continued on next page