Whirlpool 66161279 User Manual

Page 8

■

The place where the power cord exits the air conditioner
should be no more than 6 ft (183 cm) from a grounded outlet.

■

Do not block the air intake or discharge louvers in the front
panel.

■

Do not block the louvers on the outside of the air conditioner.

1. Using 2 or more people, gently place the air conditioner into

the window and center it according to the center line marked
earlier. Check that the bottom channel of the air conditioner is
against the windowsill.

2. Lower the window sash behind the top channel to hold the air

conditioner in place.

NOTE: Your model may differ from the one shown.

Attach Side Curtains to Window

1. Pull the right-hand curtain out until it fits into the window

channel.

2. Use a

¹⁄₈" drill bit to drill a starter hole through the top hole in

the side curtain and into the window sash.

3. Insert one of the

³⁄₄" screws through the top hole of the right-

hand curtain and into the window sash.

4. Use a

¹⁄₈" drill bit to drill a starter hole through either the

bottom or side holes in the right-hand curtain and into the
windowsill or frame.

5. Insert one of the

³⁄₄" screws through the hole drilled in Step 4.

Side Curtain Screws

6. Repeat steps 1 through 5 for attachment of the left-hand

curtain.

A. Air conditioner
B. Bottom channel

C. Windowsill
D. Outside

A. Side curtain against window channel
B. Window sash behind top channel

C. Bottom channel in behind windowsill

A. Optional screws