beautypg.com

Warning, Prepare window for installation, Position air conditioner – Whirlpool 66161279 User Manual

Page 7

background image

7

2. Slide the side curtain down the track until the curtain is

aligned with the top and bottom of the air conditioner cabinet.

3. Slide the side curtain frame into the top channel on the top of

the air conditioner and the track on the bottom of the air
conditioner.

4. Repeat the previous steps for the left-hand side curtain and

frame.

Prepare Window for Installation

1. Measure the width of the window opening.

2. Mark the center line on the inside windowsill.

3. Attach the foam seal with adhesive strip to the bottom of the

upper window.

Prepare Window with Storm Window or

Other Obstruction

1. Follow the steps in “Prepare Window for Installation.”

2. If possible, remove the storm window frame or other

obstruction.

3. If storm window frame or other obstruction cannot be

removed, attach a piece of wood across windowsill with the
thickness necessary for proper pitch of the air conditioner to
the outside to drain condensation from the unit.

Accumulated rainwater or condensation must be allowed to
drain away.

Position Air Conditioner

NOTES:

Handle the air conditioner gently.

Be sure your air conditioner does not fall out of the opening
during installation or removal.

A. Width of window opening
B. Center line

B

A

A. Piece of wood
B. Windowsill

C. Indoors

D. Outdoors

E. Storm window frame or

other obstruction

1

¹⁄₂

"

Min.

¹⁄₂

"

Min.

A

B

D

C

E

WARNING

Excessive Weight Hazard

Use two or more people to move and install
air conditioner.

Failure to do so can result in back or other injury.