beautypg.com

Installation requirements, Tools and parts—all models, Location requirements—all models – Whirlpool 66161279 User Manual

Page 4

background image

4

INSTALLATION REQUIREMENTS

Tools and Parts—All Models

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.

Tools Needed

Parts Supplied

Check that all parts are included in parts package.

Location Requirements—All Models

IMPORTANT: Observe all governing codes and ordinances.

Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.

The location should provide:

Grounded electrical outlet within 6 ft (183 cm) of where the
power cord exits the air conditioner.

NOTE: Do not use an extension cord.

Free movement of air in room to be cooled.

A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.

Adequate wall support for weight of air conditioner. Air
conditioner weighs 50 lbs to 75 lbs (22.7 kg to 34 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.

Window Installation

Window Opening Measurements—Small Chassis:
5500 Btu, 6300 Btu and 8000 Btu:

21" (53.3 cm) minimum to 33

¹⁄₂" (85 cm) maximum opening

width.

13

¹⁄₂" (34.3 cm) minimum opening height

Window Opening Measurements—Large Chassis: 10k and
12k Btu

24" (61 cm) minimum to 36" (91.4 cm) maximum opening
width.

15" (38.1 cm) minimum opening height.

Phillips screwdriver

Scissors

Level

Tape measure

Cordless drill and

¹⁄₈" bit

Pencil

A. Foam seal with adhesive

strip

B. Foam seal without

adhesive strip

C. Window lock bracket
D. Side bracket (on some

models)

E.

³⁄₈" screws (4) (5500, 6300 and 8k

models only)

F.

³⁄₄" screws (5) (6 provided on 10k and

12k models)

G. Side curtains (2)
H. Top channel seal (on some models)

I. Top channel (on some models)

A

B

C

D

E F

G

H

I

A. Cabinet louvers

A. Small chassis: 21" (53.3 cm) minimum;

Large chassis: 24" (61 cm) minimum

B. Small chassis: 13

¹⁄₂" (34.3 cm) minimum;

Large chassis: 15" (38.1 cm) minimum

A

A

B