Whirlpool 66161279 - Manual (Page 10)

10
Prepare Air Conditioner for Installation
Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Place the tabbed side of the side curtain in the track on the
right-hand side of the air conditioner cabinet.
2. Slide the side curtain down the track until the curtain is
aligned with the top and bottom of the air conditioner cabinet.
3. Slide the side curtain frame into the top channel on the top of
the air conditioner and the track on the bottom of the air
conditioner.
4. Repeat above steps for the left-hand side curtain and frame.
Prepare Window for Installation
1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
3. Attach the foam seal with adhesive strip to the bottom of the
upper window.
Position Air Conditioner
NOTES:
■ Handle the air conditioner gently.
■ Be sure your air conditioner does not fall out of the opening
during installation or removal.
■ The place where the power cord exits the air conditioner
should be no more than 6 ft (183 cm) from a grounded outlet.
■ Do not block the air intake or discharge louvers in the front
panel.
■ Do not block the louvers on the outside of the air conditioner.
A. Tabbed side of side curtain
B. Curtain frame
A
B
A. Width of window opening
B. Center line
B
A
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.