Windsor Saber Compact 22 - Manual (Page 19)

English
19
Errors with display
Overload
display Display Error Remedy
Perma-
nent light Pcb. Störung=4
Pcb. fault=4 Defective electronics Call customer service.
blinks
once Bürstm.Störung=1
Brushmot.fault=1 Short circuit in the
brush motor Call customer service.
Saugtb.Störung=1
Vac.mot. fault=1 Short circuit in vacu-
um motor
Ventil.Störung=1
Valve fault=1 Short circuit in soleno-
id valve
Fahrmt.Störung=1
Drivemot.fault=1 Short circuit in drive
motor
blinks
twice Bürstm.Störung=2
Brushmot.fault=2 Cable rupture in the
brush motor Call customer service.
Saugtb.Störung=2
Vac.mot. fault=2 Cable rupture in vacu-
um motor
Ventli.Störung=2
Valve fault=2 Cable rupture in sole-
noid valve
Fahrmt.Störung=2
Drivemot.fault=2 Cable rupture in drive
motor
blinks th-
rice Heiss, abkühlen!
Hot, let cool! Temperature in the
electronics system is
high. Let the electronics system cool
down for at least 15 minutes.
Saugtb.Störung=3
Vac.mot. fault=3 Overload vacuum mo-
tor Turn the program selection
switch to OFF or Drive. Then
select again the cleaning pro-
gram. If the fault recurs, call
customer service.
Bürstenüberlast!
Brush Overload! Overload on brush
motor
Fahrmt.Störung=3
Drivemot.fault=3 Overload drive motor
blinks four
times Prüfe Battspanng
Check Battery! Battery voltage is not
between 17 and 33 V Call customer service.
Battery voltage is too
high while charging Stop charging. You can still use
the machine; however, call Cu-
stomer Service
Batteriefehler!
Battery fault! Battery fault
Notaus-Schalter!
Emergency button Emergency-stop but-
ton has been pressed
while charging the bat-
tery. Release emergency-stop but-
ton. .