Windsor Saber Compact 22 - Manual (Page 17)

English
17
Î Turn the waste container slightly in the
clock-wise direction and pull it out simul-
taneously.
Î Empty waste container.
Î Replace the waste container.
Î Remove the squeegee tool.
Î Unscrew the star grips.
Î Remove the plastic parts.
Î Remove the squeegee blades.
Î Turn the squeegee blades or insert new
ones.
Î Insert the plastic parts.
Î Screw in and tighten the star grips.
Î Empty the dirty water reservoir.
Î Move out the pedal to drive out the run-
ning gear towards the right and release it
upward.
Î Briefly press the handle downward so
that the chassis can drive out.
Î Press the brush change key and tilt the
cover on the brush head towards the si-
de.
Î Pull out the brush rollers.
Î Insert and lock into place the new brush
rollers.
Î Close the cover, align the brushes and
lock in the cover.
Î Drive in the running gear. Press the pe-
dal downward and lock it towards the left.
Î Empty the dirty water reservoir.
Î Move out the pedal to drive out the run-
ning gear towards the right and release it
upward.
Î Briefly press the handle downward so
that the chassis can drive out.
Î Turn the button for the setting of the ad-
vance speed in "– " direction.
Maintenance Works
Empty the waste container
Turn or replace squeegee blades
Replacing the brush rollers
Replacing the disk brushes