Wintal PVR10 User Manual
Page 43
43
10.4 network SettIngS
MEnu
SEttINGS
NEtwoRk
and press the
key.
The ethernet port located on your PVR10HD will
allow it to receive MHEG-5 broadcasts once it
becomes available in Australia. We have included
this to make your PVR10HD as future proof as
possible.
MHEG-5 provides interactive/hybrid services
beyond broadcast TV and also allows for EPG
data to be transmitted via the internet.
The default DHCP IP mode setting will
automatically configure your PVR10HD based
on your existing network settings. However, if required, you may choose
StAtIC
and enter the necessary
information.
10.5 factory reSet
warnIng: factory reset will revert all settings back to factory defaults and erase
all channels. Beware when choosing this option!
MEnu
SEttINGS
FACtoRY RESEt
Press the
key and input the local password
(The default password is
0000
).
Use the
key to highlight
ok
and press the
key.
Wait for the reset operation to complete. Your PVR10HD will prompt you to do a channel scan once it’s done.
Confirm it to initiate an auto channel search.