Wintal PVR10 - Manual (Page 35)

35
6.2 unMount uSB devIce
IMPortant: always make sure you unmount your uSB device before unplugging it!
Failure to do so may result in corrupt data, damage your USB device, or cause your PVR10HD to behave abnormally.
Select MEnu 
PVR

UNMoUNt USB
and press the key.
1. The right hand column lists your currently attached USB devices. If you have more than one USB device
attached, use the
key to bring up a pop-up menu to choose the USB drive you wish to unmount.
2. If you have only one USB device attached, you can use the key to highlight
ok
and press
3. A confirmation window will pop up, choose
ok
to confirm, or
ExIt
to cancel the operation.
Alternatively, you can also select MEnu 
SEtUP

StoRAGE dEVICE
and press the
key.
1. Enter the local password (default password is
0000) to confirm.
2. Use the and keys to select
the USB storage device you wish to unmount
and press
3. Select
UNMoUNt USB
and press , a warning box pops up for confirmation.
4. With
ok
highlighted press to complete the format operation. There will not password confirmation once
you press as you’ve already entered the password to enter this screen in the first place.
note:
In this screen you can verify free and used space for your storage device. You will not see the UNMOUNT USB option for the Internal
HDD.